Central remote controller Owner’s Manual
8
-EN
Each screen shows a display example. The display content may vary with the usage environment settings.
Names and Functions of Each Part
Operation Panel Part
No. Name Functions
1
LCD display part (P.11)
2
Run lamp Lights up during operation and turns off when stopped.
* The Run lamp lights up if any of the air conditioners is operating and turns
off when all the air conditioners are stopped.
3
Check lamp Lights in red if an abnormality occurs. Please contact the dealer from whom
you purchased the unit.
4
[ ] button Press to start operation.
5
[ ] button Press to stop operation.
6
[ ] (Control) button Press to display the “Control” screen or the “Menu” screen for controlling air
conditioners.
7
[∧] [∨] [<] [>] buttons Press to select setting item.
8
[ ] (Confirm) button Press when switching screens from All to Zone to Unit, or when selecting an
item and going to the next screen.
9
[ ] (Return) button Press to return to the previous screen.
10
[ ] (Menu) button Press to display the “Settings Menu” screen to configure Unit settings.