S8 T8 T9
5-6
No Step Procedure Photo
7 "Download
Complete"
Message
After the firmware is
successfully loaded, you will
see "Download Complete"
message and only the
Power LED is lit (Standby
Mode).
(The FW upgrade will take
about 6 minutes.)
Unplug and re-plug the
power cord of the projector.
8 Checking
Firmware
Version
Power on the projector and
press "MENU" button to
launch OSD menu. Select
"Status display" to check
the firmware version
1
2
To Next Page
Loading...
