Toshiba TDP-WX5400 - Names of each Part on the Control Panel and Remote Control

20 21
Preparations
Names of each part on the control panel and remote control
(1)
(1)
(2)
(6)
(7)
(3)
(4)(8)
(6)
(7)(20)
(21)
(8)
(5)
(2)
(3)
(4)
(5)
(18)
(19)
(9)
(9)
(22)
(23)
(24)
(10)
(11)
(12)
(10)(25)
(11)(26)
(12)
(15)
(16)
(17)
(13)
(13)(27)
(28)
(14)
(15)
(16)
(17)
(14)
(18)
(19)
Remote ControlControl panel
Name : Main Function
Control panel
(1)
ZOOM + button
:
Adjusts the screen size.
(2)
ZOOM – button
:
Adjusts the screen size.
(3)
UP SHIFT button
:
Move images up.
(4)
RIGHT SHIFT button : Move images right.
(5)
DOWN SHIFT button :
Move images down.
(6)
FOCUS + button :
Focus the projected image.
p.39
(7)
FOCUS – button
:
Focus the projected image.
p.39
(8)
LEFT SHIFT button
: Move images left.
(9)
MENU button
:
Displays menus.
p.46
(10) Selection button
:
Menu selections and adjustments, volume control, etc.
p.46
(11) RETURN button
: Goes back one screen.
(12) AUTOSET button :
Performs auto-adjustment of input signals from computer.
p.42
(13) LAMP 2 :
See Indicator Messages.
p.74
(14) LAMP 1
:
See Indicator Messages.
p.74
(15) ENTER button
:
Accepts the selected mode.
(16)
ON/STANDBY button
:
Turns the power on/off (standby).
p.36
Name : Main Function
(17) INPUT button :
Selects input.
p.38
(18) ON/STANDBY (LED) : See Indicator Messages.
p.74
(19) STATUS (LED) : See Indicator Messages.
p.74
Remote control
(1) Status LED : Lights when the remote control is used.
(2) ON/STANDBY button :
Turns the power on/off (standby).
p.36
(3) INPUT button :
Selects input.
p.38
(4) Cursor control button (Right) :
Controls a Cursor.
p.24
(5) Page Dn button : Proceeds PowerPoint® slides.
p.24
(6) ENTER button : Executes menu operations, etc.
(7) Selection button (Right) : Menu selections and adjustments, volume control, etc.
p.46
(8) FOCUS + button :
Focus the projected image.
p.39
(9) FOCUS – button :
Focus the projected image.
p.39
(10) AUTOSET button : Performs auto-adjustment of input signals from computer.
p.42
(11) Vol + button : Ajusts the volume.
(12) STATUS button : Opens the OSD Status menu (the menu only opens when
an input device is detected).
(13) Vol – button : Ajusts the volume.
(14) Cursor control button (Up): Controls a Cursor.
p.24
(15) ENTER button : Accepts the selected mode.
(16) Cursor control button (Left): Controls a Cursor.
p.24
(17) Cursor control button (Down) :
Controls a Cursor.
p.24
(18) Page Up button : Reviews PowerPoint® slides.
p.24
(19) Selection button (Up) :
Menu selections and adjustments, volume control, etc.
p.46
(20) Selection button (Left) :
Menu selections and adjustments, volume control, etc.
p.46
(21) Selection button (Down) :
Menu selections and adjustments, volume control, etc.
p.46
(22) ZOOM + button : Adjusts the screen size.
(23) ZOOM – button : Adjusts the screen size.
(24) RETURN button : Goes back one screen.
(25) MENU button :
Displays menus
.
p.46
(26) MUTE button : Cuts off the picture and sound temporarily.
p.43
(27) FREEZE button : Pauses image.
p.44
(28) LENS SHIFT button : Displays the lens shit screen.
p.39
Note
For the remainder of this manual, buttons are referred to as follows:
Selection buttons
⇒
pqtu
; ENTER button
⇒
•