Toshiba TDP-WX5400 - Using the Adjust Menus; The Image Adjustment Menu

50
51
Operations
The Adjust menu contains overall projector settings for image output such as sharpness, overscan
and color matrix. Three tabs are accessible through the Adjust menu; Image adjustment, Display
setting, and Advanced.
Items that can be set or adjusted are marked “Yes”, and those that cannot are marked “No”. (When
an item is masked, it indicates that you cannot select for the current input).
The Image adjustment menu
Item
p q
Description
Computer 1 Computer 2 Computer 3
Y/PB/PR Video S-video
Picture mode
Press
and toggle the picture
mode with
p q
.
Bright/Presentation/Video/
Cinema/Photographic/sRGB
Yes Yes Yes Yes Yes Yes
Contrast
Adjust the image contrast.
Lower
t u
Higher
Yes Yes Yes Yes Yes Yes
Brightness
Adjust the brightness of the image.
Darker
t u
Lighter
Yes Yes Yes Yes Yes Yes
Sharpness
Adjust the sharpness of the image.
Softer
t u
Sharper
Yes Yes Yes Yes Yes No
Color
Adjust the color of the image.
Lighter
t u
Deeper
No No No Yes Yes No
Tint
*1
Adjust the tint of the image color.
Reddish
t u
Greenish
No No No Yes Yes No
*1: Tint can be displayed and adjusted only when the video signal is set to [NTSC] or [Auto].

Using the Adjust menus
The Setting 1 menu
Item
p q
Description Bright
Presenatation
Video Cinema Photographic sRGB
Gamma
Press
and toggle the Gamma
level with
p q
.
Dynamic/Natural/Black detail
Yes Yes Yes Yes Yes Yes
Color temp.
Adjust the Color temp.
Lower
t u
Higher
No No Yes Yes Yes Yes
BrilliantColor
Adjust the BrilliantColor value.
Lower
t u
Higher
No No Yes Yes Yes Yes
The White balance menu
Item
p q
Description Bright
Presenatation
Video Cinema Photographic sRGB
R-level Adjust the R-level. Lower
t u
Higher Yes Yes Yes Yes Yes Yes
G-level Adjust the G-level.
Lower
t u
Higher Yes Yes Yes Yes Yes Yes
B-level Adjust the B-level.
Lower
t u
Higher Yes Yes Yes Yes Yes Yes