Toshiba TDP-WX5400 - The Display Setting Menu

52
53
Operations
The Color correction menu
Item
p q
Description Bright
Presenatation
Video Cinema Photographic sRGB
Yellow Adjust the Y level. Lower
t u
Higher No Yes Yes Yes Yes Yes
Magenta
Adjust the M level. Lower
t u
Higher No Yes Yes Yes Yes Yes
Cyan
Adjust the C level. Lower
t u
Higher No Yes Yes Yes Yes Yes
Using the Adjust menus (Continued)
The Display setting menu
Item
p q
Description
Computer 1 Computer 2 Computer 3
Y/PB/PR Video S-video
Screen Select the screen size using
t u
.
4:3 — Atandard TV screen.
16:9 — Wide screen aspect for
video output.
16:10 — For video signal with an
aspect ratio of 16:10
Letterbox — For viewing LaserDisc
movies or non-
anamorphic DVDs on a
16:9 screen
True — Displays the image in its
true resolution.
Standard — Displays the image in its
aspect ratio.
Yes Yes Yes Yes Yes Yes
Overscan
Select the overscan value with
t u
.
93%/95%/97%/100%
Yes Yes Yes Yes Yes Yes
H-position Adjust the horizontal position of the
image.
Move left
t u
Move right
Yes Yes No Yes No No
V-position Adjust the vertical position of the
image.
Move down
t u
Move up
Yes Yes No Yes No No
Frequency Adjust with
t u
to eliminate periodic
patterns and ickering when ne
vertical lines appear on the screen.
Yes Yes No Yes No No
Phase
Adjust to eliminate icker with
t u
. Yes Yes No Yes No No
Mode priority Enable or disable mode priority
override with
t u
.
Wide/4:3
Yes Yes Yes No No No
Notes
If you use the Screen setting function on commercial video software, broadcast or cable-
broadcasting programs to display images with the varying aspect ratio except for the purpose
of your private viewing and listening, it may infringe the copyright protected by the copyright
laws.
[Mode priority] allows you to set the signals which are difcult to distinguish between
[Wide] or [4:3] to your selected mode.

•
•