Toshiba TEC B-SX4T Series - Installation Procedure

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO18-33012B
4.14 STRIP MODULE (B-9904-H-QM-R)
4-91
4.14.3 Installation Procedure
1) Turn the power off and disconnect the power cord.
2) Remove the two black screws to detach the front plate.
NOTE: Retain the two black screws and front plate.
3) Remove the four B-4x5 screws from the side panel (L).
4) Open the top cover and remove the three P-4x8 screws that secure the side panel (L).
5) Lift the side panel (L) and put it aside.
6) Disconnect the fan motor harness from CN19 on the Main PC board, and then separate the side
panel (L).
Front Plate
B-4x5 Screw
P-4x
8
Sc
r
e
w
Top Cover
B-4x5 Screw
Side Panel
Black Screw
Side Panel
(
L
)
Fan Motor Harness
Fan Motor
C
N1
9
Main PC Board
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es