Toshiba TEC B-SX4T Series - Fanfold Paper Guide Module (B-4905-Ff-Qm-R); Applicable Model; Packing List; Installation Procedure

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO18-33012B
4.20 FAN FOLD PAPER GUIDE MODULE (B-4905-FF-QM-R)
4-121
4.20 FANFOLD PAPER GUIDE MODULE (B-4905-FF-QM-R)
4.20.1 Applicable Model
This optional device is the fan fold paper guide, which is intended for the following models:
B-SX4T-QM-R Series, B-SX5T-QM-R Series
4.20.2 Packing List
All the following parts are supplied with the kit. Make sure you have all items shown below.
Description Q’ty/unit
Fanfold Paper Guide (rear) 1
4.20.3 Installation Procedure
1) Open the top cover.
2) Remove the two FL-4x5 screws to detach the blind plate on the back of the printer and attach the
fanfold paper guide (rear) with these same screws.
WARNING!
Disconnect the power cord before installing the Fanfold Paper Guide Module.
Screw (FL-4x5)
Screw (FL-4x5)
Fanfold Paper Guide (rear)
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es