4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33012B
(Revision Date May 18, 2006)
4.21 WIRELESS LAN MODULE (B-9700-WLAN-QM-R)
4-122
4.21 WIRELESS LAN MODULE (B-9700-WLAN-QM-R)
4.21.1 Applicable Model
This optional device is the fan fold paper guide, which is intended for the following models:
B-SX4T-QM-R Series, B-SX5T-QM-R Series
4.21.2 Packing List
All the following parts are supplied with the kit. Make sure you have all items shown below.
Wireless LAN Board (1 pc.)
Antenna Cover (1 pc.)
SMW-3x6 Screw (3 pcs.)
Installation Manual (1 copy)
WLAN Support Plate (1 pc.)
FCC/IC Sticker (1 pc.)
WARNING
1. Follow all manual instructions. Failure to do so could create safety hazards such as fire or
electrocution.
• Manual instructions must be followed when installing option kits or adding cables to avoid
system failures and to insure proper performance and operation.
• Failure to follow manual instructions or any unauthorized modifications, substitution or change
to this product will void the limited product warranty.
2. Turn the power off and disconnect the power cord before installing the wireless LAN board.
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
To Next Page
Loading...
