3. NOTE FOR OPTIONAL EQUIPMENT INSTALLATION/MAJOR UNIT REPLACEMENT
EO18-33012B
/MAINTENANCE
3.4 REMOVING THE OPERATION PANEL
3- 5
3.4 REMOVING THE OPERATION PANEL
1) Open the top cover. (Refer to section 3.1.)
2) Remove the side panel (L) from the printer. (Refer to section 3.2.)
3) Remove the SMW-4x8 screw that secures the operation panel ass’y.
4) Fully open the top cover, otherwise the operation panel ass’y is stuck on the tab and cannot be
removed from the printer.
5) Lift the operation panel ass’y to release the hook, and then remove the operation panel ass’y by
moving it forward.
SMW-4x8 Screw
Top Cover
Operation Panel Ass’y
Tab
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
To Next Page
Loading...
