Toshiba TEC B-SX4T Series - Attaching the RFID Module

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33012B
(Revision Date: Feb. 15, 2007)
4.10 RFID MODULE (B-9704-RFID-U1-US/EU/EU-R)
4-51
4.10.5 Attaching the RFID Module
1) Attach the Cable Clamp to and fit the Bush into the positions shown in the picture below.
2) Pass the Antenna Cable through the Bush, and fix the cable with the Cable Clamp
3) Attach the RFID Module to the RFID Attachment Plate A and the RFID Attachment Plate B with
the three SMW-3x6 screws
NOTE: Care should be taken not to catch the cables between the RFID Module and the RFID Attachment
Plate A.
Bush
Cable
Clamp
Bush
Cable
Clamp
A
ntenna
Cable
RFID Attachment Plate B
RFID Module
RFID Attachment Plate
A
SMW-3x6 Scre
w
SMW-3x6 Scre
w
Cable
RFID Module
RFID Attachment Plate A
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es