Toshiba TEC B-SX4T Series - PERIODIC MAINTENANCE PROCEDURE

EO18-33012B
(Revision Date: Jul. 15, 2008)
11. RFID ANALYZE TOOL----------------------------------------------------------------------------------------- 11- 1
11.1 System Requirement ------------------------------------------------------------------------------------------11- 1
11.2 Set up -------------------------------------------------------------------------------------------------------------- 11- 2
11.3 Application Functions ------------------------------------------------------------------------------------------ 11- 3
11.4 Operating Procedure------------------------------------------------------------------------------------------ 11-10
CAUTION!
1. This manual may not be copied in whole or in part without prior written
p
ermission of TOSHIBA
TEC.
2. The contents of this manual may be changed without notification.
Copyright © 2004
by TOSHIBA TEC CORPORATION
A
ll Rights Reserved
570 Ohito, Izunokuni-shi, Shizuoka-ken, JAPAN
This manual is intended for both B-SX4T series and B-SX5T series. Please note that the
illustrations and pictures provided are of the B-SX4T series.
The SP40II has been developed from the B-SX4T-GS10-QP, and the differences between two
are the color of the front cover and the operation panel ass’y, the model name label, and the
CD-ROM. The other specifications including the firmware are common.
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es