1. UNPACKING
EO18-33012B
1.1 PROCEDURE
1- 1
1. UNPACKING
NOTE: The pictures provided in this manual are of the B-SX4T series with the serial number of 3T311410
or earlier. Please note that they are partly different from the B-SX4T series with the serial number
of 3T311411 or later and B-SX5T series with the serial number of 3Wxxxxxx or later.
1.1 PROCEDURE
1) Open the carton.
2) Unpack the accessories and the front pad from the carton.
3) Unpack the pads and the printer from the carton.
4) Remove the four pieces of tape and the rear pad from the printer.
Carton
Accessories
Front Pad
Printer
Bottom Pad
Right Side Pad
Left Side Pad
Tape
Rear Pad
Tape
Tape
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
To Next Page
Loading...
