Toshiba TECRA 9100 Series - Page 114

3 Tests and Diagnostics 3.2 Executing the Diagnostic Test
3-4 TECRA 9100 Maintenance Manual (960-347)
2. To execute the DIAGNOSTIC TEST MENU from the DIAGNOSTICS MENU, set
the highlight bar to 1, and press Enter. The following DIAGNOSTIC TEST MENU
will appear:
TOSHIBAPersonalComputerxxxxxxxDIAGNOSTICS
VersionX.XX(C)CopyrightTOSHIBACorp.XXXX
DIAGNOSTICSMENU:
1-SYSTEMTEST
2-MEMORYTEST
3-KEYBOARDTEST
4-DISPLAYTEST
5-FLOPPYDISKTEST
6-PRINTERTEST
7-ASYNCTEST
8-HARDDISKTEST
9-REALTIMERTEST
10-NDPTEST
11-EXPANSIONTEST
12-
13-CD-ROM/DVD-ROMTEST
14-LANTEST
88-ERRORRETRYCOUNTSET[FDD&HDD]
99-EXITTODIAGNOSTICSMENU
↑↓
→← :Selectitems
Enter:Specify
Esc:Exit
Refer to sections 3.4 through 3.17 for detailed descriptions of each Diagnostic Tests 1
through 14. Function 88 sets the floppy disk drive and hard disk drive error retry
count. Function 99 exits the submenus of the Diagnostic Test and returns to the
Diagnostic Menu.