1 Hardware Overview 1.1 Features
1-4 TECRA 9100 Maintenance Manual (960-347)
PS/2 mouse/keyboard port
Either a PS/2 compatible keyboard or a PS/2 compatible mouse can be connected to
the port.
PC card slot
A PC card slot (PCMCIA) accommodates two 5mm cards (Type II) or one 10.5mm
(Type III) card. These slots support 16-bit PC cards and Card Bus (By help from
Windows 98/2000) PC cards (32-bit).
SD Card
An SD Card Slot can accommodate Secure Digital flash memory cards with
capacities of 8MB, 16MB, 32MB, 64MB and 128MB. SD cards let you easily
transfer data from devices, such as digital cameras and Personal Digital Assistants,
that use SD Card flash-memory.
Docking interface port
A 242-pin, docking interface port enables connection of an optional Port Replicator
2001. It provides additional features as follows:
• RJ-45 LAN jack, RT11 Modem jack
• External monitor port
• Parallel port and Serial port
• PS/2 Mouse port and Keyboard port
• DC IN socket
• Security lock slot
• Audio line-in, line out jack
• Two USB ports and an IEEE 1394 port
• DVI port
AccuPoint II
A pointing device, the AccuPoint II, located in the center of the keyboard and control
buttons at the base of the keyboard enables control of the on-screen pointer and
scrolling of the windows without requiring desk space for a mouse.
To Next Page
Loading...
