4.8 Top Cover with Display Assembly 4 Replacement Procedures
4-35 TECRA 9100 Maintenance Manual (960-347)
2. Turn the computer right side up, open the display panel and disconnect the IPS cable
from PJ122, the FL/LCD cable from PJ76 and the speaker cables from PJ127 and
PJ129 on the I/O board.
3. Remove two M2.5×8 screws.
4. Remove one M2.5×13 black screw.
M2.5×13 black screw
M2.5×8 screws
PJ76
PJ122
PJ127
LCD/FL cable
IPS cable
PJ129
Figure 4-22 Disconnecting the cables
To Next Page
Loading...
