Toshiba TECRA 9100 Series - Speakers; Removing the Speakers

4 Replacement Procedures 4.12 Speakers
TECRA 9100 Maintenance Manual (960-347) 4-46
4.12 Speakers
Removing the Speakers
To remove the speakers, follow the steps below and refer to figures 4-28 to 4-31.
1. Lay the top cover and display assembly upside down.
2. Remove two M2.5×6 screws securing the metal plate.
LCD/FL cable
Metal plate
M2.5×6 silver screws
Figure 4-28 Removing two screws securing the metal plate