Toshiba TECRA 9100 Series - Installing the Speakers

4 Replacement Procedures 4.12 Speakers
TECRA 9100 Maintenance Manual (960-347) 4-50
Installing the Speakers
To install the speakers, follow the steps below and refer to figures 4-28 to 4-31.
1. Seat each speaker.
2. Secure the speakers with four M2.5×6 screws.
3. Route the speaker cables through guides.
4. Secure the speaker cables with tape.
5. Secure the metal brace with two M2.5×6 screws.