4.24 Antenna Coaxial Cables 4 Replacement Procedures
TECRA 9100 Maintenance Manual (960-347) 4-81
6. Remove one M2.5×4 screw securing the metal brace.
7. Lift up the plastic brace and lay it upside down.
8. Remove one M2.5×4 silver screw securing the plastic brace.
9. Slip tweezers into the side of the plastic brace and pry to release two latches and
remove the top part of the plastic brace.
Plastic brace
Top of the plastic brace
M2.5×4 silver screw
Metal brace
M2.5×4 silver screw
Figure 4-53 Removing the metal brace and plastic brace
To Next Page
Loading...
