Toshiba TECRA 9100 Series - Installing the Antenna Coaxial Cables

4.24 Antenna Coaxial Cables 4 Replacement Procedures
TECRA 9100 Maintenance Manual (960-347) 4-83
Installing the Antenna Coaxial Cables
To install the antenna coaxial cables, follow the steps below and refer to figures 4-51 to 4-54.
1. Seat the antenna sheets and route the antenna coaxial cables.
2. Secure the antenna coaxial cables with tapes.
3. Thread the antenna coaxial cables through the plastic brace and secure it with one
M2.5×4 silver screw.
4. Route the wireless LAN antenna coaxial cables through the hooks and secure them
with tape.
5. Route the Bluetooth antenna coaxial cable through the hooks and secure it with
tape.
6. Pull the LCD/FL cable through the bridge.
7. Secure the metal plate with two silver M2.5×6 screws.