Toshiba TECRA 9100 Series - Installing the LCD;FL Cable

4 Replacement Procedures 4.25 LCD/FL Cable
4-88 TECRA 9100 Maintenance Manual (960-347)
Installing the LCD/FL Cable
To install the LCD/FL cable, follow the steps below and refer to figures 4-55 to 4-58.
1. Pull the LCD/FL cable through the bridge and the plastic brace.
2. Route the wireless LAN antenna coaxial cables and the Bluetooth antenna coaxial
cable through the plastic brace.
3. Set the top part of the plastic brace.
4. Secure the plastic brace with one silver M2.5×4 screw.
5. Seat the plastic brace.
6. Pull the LCD/FL cable through the bridge.
7. Secure the metal plate with two silver M2.5×6 screws.