4 Replacement Procedures 4.28 FL (Model 14.1 SXGA+ Sharp)
4-110 TECRA 9100 Maintenance Manual (960-347)
3. Remove four screws from the side of the LCD module.
Screws
Screws
Loosen the screws with 0.1078N⋅m (1.1kgf⋅cm) of torque.
Figure 4-81 Removing the screws
4. Turn the LCD module right side up.
5. Release two latches on the lamp side of the top frame.
Latches
Figure 4-82 Removing the top latches
To Next Page
Loading...
