4 Replacement Procedures 4.28 FL (Model 14.1 SXGA+ Sharp)
4-112 TECRA 9100 Maintenance Manual (960-347)
8. Turn the LCD module upside down.
9. Remove two screws securing the lamp cover.
10. Remove the lamp cover.
11. Gently remove the FL taking care not to damage it.
Screw
Lamp cover
Screw
FL
Loosen the screws with 0.1078N⋅m (1.1kgf⋅cm) of torque.
Figure 4-84 Removing the lamp cover and the FL
To Next Page
Loading...
