2 Troubleshooting Procedures 2.4 System Board Troubleshooting
2-26 TECRA 9100 Maintenance Manual (960-347)
Procedure 3 Diagnostic Test Program Execution Check
Execute the following tests from the Diagnostic Test Menu. Refer to Chapter 3, Tests and
Diagnostics, for more information on how to perform these tests.
1. System test
2. Memory test
3. Keyboard test
4. Display test
5. Floppy Disk test
6. Hard Disk test
7. Real Timer test
8. NDP test
9. Expansion test
10. Sound/LAN/Modem test
11. CD-ROM/DVD-ROM test
12. Bluetooth test
13. Wireless LAN test
If an error is detected during these tests, go to Procedure 3.
To Next Page
Loading...
