4 Replacement Procedures 4.16 LCD Module
Installing the 15.4-inch LCD Module
NOTE: LCD/FL cable must be carefully peeled away before disconnecting it from the
module.
Install the 15.4-inch LCD module according to the following procedures and Figures 4-39, 4-
40.
1. Turn the LCD upside down.
2. Connect the LCD/FL cable to the LCD module connector.
3. Return the normal LCD placement.
4. Place the LCD bracket in the correct position and secure it with the two M2x3 white
flat-head screws on each of the left and right sides.
4-58 Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual
To Next Page
Loading...
