4 Replacement Procedures 4.12 Cover assembly and Base assembly
4-44 [CONFIDENTIAL] TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)
7. Remove the following screws.
• M2.5×8B FLAT HEAD screw ×5
• M2.5×12B FLAT HEAD screw ×3
Figure 4-25 Removing the cover assembly and base assembly (4)
M2.5x8B FLAT HEAD
M2.5x8B FLAT HEAD
M2.5x8B FLAT HEAD
M2.5x12B FLAT HEAD
M2.5x12B FLAT HEAD
To Next Page
Loading...
