3.30 SETUP 3 Tests and Diagnostics
TECRA M4 Maintenance Manual (960-521) [CONFIDENTIAL] 3-95
5. HDD Password
This option registers, resets or changes the HDD password.
(a) HDD
Hard disk for setting the password.
Built-in HDD The password is set to Built-in HDD. (This cannot be
changed.)
(b) HDD Password Mode
This item registers HDD Password and can be selected only for registering
HDD password. To change HDD Password Mode when HDD Password is
registered, delete the registered HDD Password first, and then register new
password.
User Only Sets only User HDD Password (Default)
Master+User Sets Master HDD Password and User HDD Password
(c) User Password
This item sets User password.
For details on setting user password, refer to the User’s Manual.
(d) Master Password
This item sets the Master HDD password.
This can be set, only when Master+User is set in the HDD password Mode.
For details, refer to the User’s Manual.
To Next Page
Loading...
