3 Tests and Diagnostics 3.30 SETUP
3-96 [CONFIDENTIAL] TECRA M4 Maintenance Manual (960-521)
6. Boot Priority
(a) Boot Priority
Use this option to set the priority for booting of the computer and the priority
for the HDD for booting.
FDD→HDD→CD-ROM→LAN: The computer looks for bootable files in
the following order: FDD, HDD, CD-
ROM (*1) and LAN
HDD→CD-ROM→LAN→FDD: The computer looks for bootable files in
the following order: HDD, CD-ROM,
LAN and FDD.
FDD→CD-ROM→LAN→HDD: The computer looks for bootable files in
the following order: FDD, CD-ROM,
LAN and HDD.
CD-ROM→LAN→HDD→FDD: The computer looks for bootable files in
the following order: CD-ROM, LAN,
HDD and FDD.
CD-ROM→LAN→FDD→HDD: The computer looks for bootable files in
the following order: CD-ROM, LAN,
FDD and HDD.
HDD→FDD→CD-ROM→LAN: The computer looks for bootable files in
the following order: HDD, FDD, CD-
ROM and LAN. (Default)
NOTE: CD-ROM refers to an Optical drive.
NOTE: When a floppy disc drive is not connected, it boots up from SD memory card
in spite of selecting FDD.
(b) HDD Priority
Use this option to set the starting method from hard disk drive.
Built-in HDD → Second HDD
: Detecting boot command from Built-in HDD first and then second HDD
(Default)
Second HDD → Built-in HDD
: Detecting boot command from Second HDD and then Built-in HDD
Built-in HDD → Second HDD→USB
: The priority is set as Built-in HDD → Second HDD→USB.
To Next Page
Loading...
