Toshiba Tecra M9 - Keyboard Holder

4 Replacement Procedures 4.7 Keyboard holder
4.7 Keyboard holder
Removing the Keyboard holder
The following describes the procedure for removing the keyboard holder. (See Figure 4-11.)
1. Open the display and make it flat.
2. Insert your fingers into the slots on both sides and remove the keyboard holder.
Keyboard holder
Slot
Slot
Figure 4-11 Removing the keyboard holder
Installing the Keyboard holder
The following describes the procedure for installing the keyboard holder. (See Figure 4-11.)
1. Install the keyboard holder while engaging the latches.
4-22 [CONFIDENTIAL] TECRA M9 Maintenance Manual (960-631)