4.9 Keyboard 4 Replacement Procedures
5. Remove the following screws securing the keyboard.
• M2.5×4B FLAT HEAD screw ×2
6. Lift the top edge of the keyboard while releasing the latches and turn the keyboard
face down on the palm rest.
M2.5×4B FLAT HEAD
M2.5×4B FLAT HEAD
Latch
Keyboard
Latch
Latch
Figure 4-16 Removing the keyboard (1)
TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684) [CONFIDENTIAL] 4-29
To Next Page
Loading...
