Toshiba Tecra S3 - Page 345

8. Install the bezel (F) on the lamp cover and hook four latches on the lamp cover and
two latches on the P-chassis.
(1) Hitch the hook of the bezel
on the rib of the P-chassis.
(2) Lean the bezel on the lamp cover
without interference with the
TCP
Lump cover side
Be careful not to stick
the protection cover G
on the TCP
(F)
Figure 4-84 Replacing Sharp fluorescent lamp (XGA) (20)
TECRA S3 Maintenance Manual (960-532) [CONFIDENTIAL] 4-102