User’s Manual D-6
S-registers
*1: EC only appears when the Extended Result Codes configuration option
is enabled. EC is replaced by one of the following symbols, depending
upon the error control method used:
V.42bis - V.42 error control and V.42bis data compression.
V.42 - V.42 error control only.
MNP 5 - MNP class 4 error control and MNP class 5 data
compression.
MNP 4 - MNP class 4 error control only.
NoEC - No error control protocol.
*2: In some countries/regions, these result codes may not appear.
CONNECT 4800 EC*
1
11 Connection at 4800 bps
CONNECT 9600 EC*
1
12 Connection at 9600 bps
CONNECT 14400 EC*
1
13 Connection at 14400 bps
CONNECT 19200 EC*
1
14 Connection at 19200 bps
CONNECT 7200 EC*
1
24 Connection at 7200 bps
CONNECT 12000 EC*
1
25 Connection at 12000 bps
CONNECT 16800 EC*
1
86 Connection at 16800 bps
CONNECT 300 EC*
1
40 Connection at 300 bps
CONNECT 21600 EC*
1
55 Connection at 21600 bps
CONNECT 24000 EC*
1
56 Connection at 24000 bps
CONNECT 26400 EC*
1
57 Connection at 26400 bps
CONNECT 28800 EC*
1
58 Connection at 28800 bps
CONNECT 31200 EC*
1
59 Connection at 31200 bps
CONNECT 33600 EC*
1
60 Connection at 33600 bps
DELAYED*
2
88 Delay is in effect for the
dialed number
BLACKLISTED*
2
89 Dialed number is blacklisted
BLACKLIST FULL*
2
90 Blacklist is full
Downloaded from LpManual.com Manuals
To Next Page
Loading...
