STE 80747
– 41 –
DUST-PROOF & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
!
CAUTION
• Be sure to attach the gasket and apply liquid gasket. Also, be sure to coat
Loctite adhesives to all attaching bolts. If it is not be done completely, the
dust-proof and drip-proof performance will be impaired resulting in ingress of
water and dust.
2) The base cover used for the battery box as well is secured to the base with four (4)
cross-recessed truss head screws (M4x6) in such a way to sandwich the gasket
between the cover and the base. The gasket attachment surface is coated with
liquid gasket. Remove the cover while stripping off the liquid gasket, using a
minus screwdriver or the like. DO NOT pull the cover by force because it is
connected to the connector and other components internally.
Fig. 5.5 Cover used for battery box as well
When mounting the cover, apply liquid gasket to the area shown in Fig. 5.5 above.
Also, apply Loctite adhesives to all attaching bolts.
!
CAUTION
• Be sure to attach the gasket and apply the liquid gasket. Also, be sure to
coat Loctite adhesives to all attaching bolts. If it is not be done completely,
the dust-proof and drip-proof performance will be impaired resulting in
ingress of water and dust.
Cover used for battery
box as well
Apply liquid gasket to the whole
surface of the gasket.
Gasket
To Next Page
Loading...
