Toshiba THP700-IP - Tools and Supplies for Maintenance; Replacing Bellows

DUST- & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
5.3 Tools and Supplies for Maintenance
The following should be provided as tools and supplies for maintenance.
For other tools and supplies, see the THP700 Maintenance Manual provided
separately.
• Phillips and slotted screwdrivers
• Set of hexagon wrenches M3-M16
• Cutter knife
• Liquid gasket (Recommendation: 1221H made by ThreeBond)
• Loctite (242 modest strength)
5.4 Replacing Bellows
Replacement of the bellows is performed by our after-sale service engineer. If bellows
is replaced by the customer, we will not guarantee any consequential troubles or
accidents.
!
DANGER
• Before replacing the bellows with a new one, be sure to turn off the controller
power and remove the power plug.
STE85336
– 30 –