Toshiba Thunderbolt 3 Dock - Configuring Video Ports; Video Port Connections; Supported Output Modes

User’s Manual EN-23
Toshiba Thunderbolt™ 3 Dock
Configuring Video Ports
Connection
The dock provides the following video ports:
HDMI™ – for connection to HDMI™ (using the HDMI™ cable which is
not provided) interface monitors.
DisplayPort ™ – for connection to DisplayPort™ (using the
DisplayPort™ cable which is not provided) interface monitors.
VGA monitor port – for connection to VGA (using the VGA cable which
is not provided) interface monitors.
Mini DisplayPort – for connection to Mini DisplayPort (using the Mini
DisplayPort cable which is not provided) interface monitors.
Connect the monitor cable (not provided) to the video output port on the
dock and the external monitor. This cable can be connected and
disconnected any time without disconnecting the dock from your computer.
You can customize the video settings of the dock. See Adjusting Video
Settings section for more information.
Output modes
The dock supports single/dual/triple output. Refer to the following table to
see detailed output modes and maximum resolution of each mode.
■ Upon connection, the video output ports on the dock become enabled
and the video output ports on the computer become disabled.
When you disconnect the dock from the computer, the video output
ports on the computer are re-enabled automatically.
NOTE
Output
Mode
Video 1 Video 2
HDMI™
output
port
DisplayPort VGA Mini
DisplayPort
HDMI™
output
port
Single
display
3840x2160
@60Hz
--- -
- 3840x2160
@60Hz
-- -
- - 1920x1080
@60Hz
--
- - - 3840x2160
@60Hz
-
- - - - 3840x2160
@30Hz