Toshiba TOSDIC-CIE DS User Manual

2. Installation and Wiring
15
Address Settings
I/O addresses are set in the communication base units and the PI/O modules. On the
communication base units, the unit address setting switch sets the unit numbers 1 to F (decimal 1
to 15). On the PI/O modules, the module address setting switch sets the module numbers 1 to E
(decimal 1 to 14).
NOTICE:
 In making the address settings, use a screwdriver that matches the address setting switch
grooves.
 Otherwise the address setting switches may get damage.
Figure 2.5 Address settings

Toshiba TOSDIC-CIE DS Specifications

General

Brand	Toshiba
Model	TOSDIC-CIE DS
Category	Control Systems
Language	English