E6581158
F-26
6
DC injection braking start frequency H
LEDdisplay
Time [s]
Output frequency [Hz]
Operation signal (F-CC)
ON
OFF
Output current [A]
0
0
Set frequency
Operation standby signal (ST-CC)
ON
OFF
H
䇭
2
“
FD
” is displayed.
“FDQP” is displayed.
H 䇭
Note1: About the same motor shaft fixing control can be exercised by entering a DC braking command from external
contacts.
Note2: If a power failure occurs during motor shaft fixing control and the motor starts to coast, motor shaft
fixing control will be canceled.
Also, if the inverter trips during motor shaft fixing control and is restored to working order by the retry
function, motor shaft fixing control will be canceled.
To Next Page
Loading...
