– 17 –
STE 71282
STARTUP MANUAL
M: (Machine)
On the TS1000 screen, "FREE" is always indicated.
S: (Status)
Indicates the program run status of the controller.
The run status comes in the following four (4) types.
RUN During program execution
STOP RESET During stop of initialization mode
(When the RUN mode takes effect, the program is
executed from the top.)
STOP RETRY During stop of restart mode
(When the RUN mode takes effect, interrupted motion
command restarts.)
STOP CONT During stop of continuous mode
(When the RUN mode takes effect, the program is
executed from the command next to the finished
command.)
Function: The function menu is displayed by reversed image on the bottom of the
display. The keys correspond to F1 to F5 in turn, when viewed from the
left. If symbol ">" is displayed on the bottom right side of the display,
the next function menu can be displayed by means of the NEXT key.
To Next Page
Loading...
