UPSMON PRO User Guide 96449-001 2
Using UPSMON-PRO Monitoring Software
With this UPS monitoring software, you can:
• Get UPS connection from serial port or USB port
• Monitor UPS status, battery capacity, output voltage, load level, etc.
• Record and review historical UPS events
• Record and review UPS information by line chart
• Set up countdown seconds between power failure - OS shutdown / OS shutdown - UPS Off
• Set up e-mail notification (ex: power outages, low battery, disconnect, etc.)
• Set up UPS features (ex: silence, battery test, no load shutdown, outlets control, etc.)
• Share UPS status to the other UPSMON-PRO (Multi-Windows / Linux )
• Start web portal for remote monitoring
--------------------------------------------------------------------------------------------------------
NOTE: We strongly recommend you log in as administrator to install UPSMON-PRO
--------------------------------------------------------------------------------------------------------
Opening UPSMON-PRO Monitoring Software
To start the software:
• Double-click the UPSMON PRO icon in the system tray
• Click Start button - choose All Programs – UPSMON PRO
Connecting UPS
To start the connection:
• Click on the ‘Connect’ button from the left Menu options
• Choose the interface for UPSMON PRO to connect to the UPS: USB Port (a) / COM Port (b) /
UPSMON PRO (c)
To Next Page
Loading...
