Disassembly and Reassembly
Toshiba
4-9
1-2-8 Bracket Gear, Gear Joint 2, 1 Removal
1) Remove the SCREW
Œ
.
2) Remove the Bracket Gear ´.
3) Remove the Gear Joint 2 ˇ.
4) Remove the Gear Joint 1 ¨.
Assembly
:
1) Be sure to align dot mark of Gear Joint 1
Œ
with
dot mark of Gear Joint 2 ´ as shown Fig 4-17.
(Refer to Timing point1)
2) Confirm the Timing Point 2 of the Gear Joint 2 ´
and Slider Cam ˇ.
Œ
SCREW
´
BRAKET GEAR
¨
GEAR JOINT 1
ˇ
GEAR JOINT 2
Fig. 4-16 Bracket Gear, Gear Joint 1,2 Removal
Œ
GEAR JOINT1
´
GEAR JOINT2
ˇ
SLIDER CAM
TIMING POINT 1
TIMING POINT 2
Fig. 4-17 Gear Joint 1,2 Assembly
1-2-7 Motor Loading Ass
’
y Removal
1) Remove the screw Œ.
2) Remove the Motor Loading Ass’y ´.
´
MOTOR LOADING ASS`Y
Œ
SCREW
Fig. 4-15 Motor Loading Ass
’
y Removal
To Next Page
Loading...
