Reference Information
2-8 Toshiba
23
PLAYBACK
1
On the SET UP screen, select
“COUNTER MEM.” using
PLAY
or
STOP
, and set to “ON” using
REW
or
FF
.
2
Press
PROG.
to exit.
The memory-stop feature allows you to quickly return to a
counter reading of “0H00M00S” from any point on the tape.
Memory stop is automatically turned on whenever the time
counter with memory is displayed on the TV screen. This is
convenient when you want to watch a segment of the tape
repeatedly. You may also discover other useful application for
this feature.
Notes: If you are rewinding the tape and the VCR stops at
“0H00M00S M”, press
REW
again to continue
rewinding.
If you press the
FF
(fast-forward) button and the time
counter never reaches “0H00M00S M” between that
point and the end of the tape, the VCR will continue to
fastforward to the end of the tape.
Memory Stop Feature (Zero Return)
REMAIN/
COUNTER
SLOW
PAUSE/STILL
STOP
FF
REC
TIMER
VC-413
TV
VCR
POWER
I.SELECT
SP/SLP
DISPLAY
TV VOL
COUNTER
PROG.
CANCEL
1
2
3
4
5
0
100
6
REW
PLAY
REMAIN/
RESET
COUNT
9
87
EJECT
REW
STOP
FF
PLAY
PROG.
STOP
PLAY
REW
FF
ENTER
COUNT RESE
T
DISPLAY
ENTER
E
n
D : PROG
TAPE LE
n
GTH
120 160 180
COUnTER MEM
on off
LA
n
GUAGE E
n
G FRA ESP
22
PLAYBACK
Useful Functions in Tape Operation
These functions will help your playback.
Tape Remaining Time
To view the tape remaining time in the VCR display, select the
tape length beforehand.
1
Turn on the VCR and load a cassette.
2
Press
PROG.
to display the MENU screen.
3
Select “SET UP” using
FF
or
REW
, and press
ENTER
.
4
Select the length of the tape, using
FF
or
REW
.
T120: for a T-120 tape or shorter
T160: for a T-140 or T-160 tape
T180: for a T-180 tape
5
Press
PROG
. to exit.
6
Press
REMAIN/COUNTER
.
The remaining time (“RT - : - -”) appears in the VCR display.
Notes
• The displayed remaining time is an approximation.
• The remaining time is calculated according to the tape speed (SP or SLP)
and the cassette type.
Counter Function
You can view the clock, linear time counter or tape remaining
time in the VCR display or on the TV screen.
Each time you press
REMAIN/COUNTER
, the VCR display
changes in sequence as follows:
The indication above will also appear on the TV screen by pressing
DISPLAY
. They are switchable with
REMAIN/COUNTER
.
To reset the linear time counter to “0:00:00”
The counter is automatically reset to “0:00:00” when a cassette is
ejected. If you want to reset at another point, such as the beginning of a
new recording, just press
COUNT RESET
.
Notes
• The linear time counter does not work on non-recorded portions on the tape.
• When the tape is ejected or the VCR is turned off, the display changes to
clock.
• If the tape rewinds back over “00:00”, “–” appears in the VCR display.
• The displayed time of the linear time counter is only an approximation.
→ Linear time counter → Tape remaining time (RT) → Clock
E
n
D : PROG
COUnTER MEM
on off
LA
n
GUAGE E
n
G FRA ESP
TAPE LE
n
GTH
120 160 180
REMAIN/
COUNTER
SLOW
PAUSE/STILL
STOP
FF
REC
TIMER
VC-413
TV
VCR
POWER
I.SELECT
SP/SLP
DISPLAY
TV VOL
COUNTER
PROG.
CANCEL
1
2
3
4
5
0
100
6
REW
PLAY
REMAIN/
RESET
COUNT
9
87
EJECT
REW
STOP
FF
PLAY
PROG.
STOP
PLAY
REW
FF
ENTER
COUNT RESET
DISPLAY
ENTER
To Next Page
Loading...
