Toshiba W-422 - Managing Timer Recordings

4-8
Toshiba
Disassembly and Reassembly
1-2-5 Gear Worm Wheel Removal
1) Remove the Gear Worm wheel Œ.
ΠGEAR WORM WHEEL
Fig. 4-13 Gear Worm Wheel Removal
1-2-6 Cable Flat Removal
1) Remove the Drum connecting part of Cable Flat Œ
from Connector Waffer ´.
2) Remove the Loading Motor connecting part of
Cable Flat Œ from Connector Waffer ˇ.
3) Rotate the Damper Capstan ¨ in the direction of
arrow “A” and remove it toward “B”.
4) Pull the Cable Flat Œ in the direction of arrow “C”
to remove.
ˇ CONNECTOR WAFER
¨ DAMPER
CAPSTAN
´ CONNECTOR WAFER
CYLINDER
CONNECTING PART
LOADING MOTOR
CONNECTING PART
ΠCABLE FLAT
"C"
"A"
"B"
Fig. 4-14 Cable Flat Removal