Toshiba W-422 - MTS Broadcast Compatibility

Disassembly and Reassembly
Toshiba
4-9
1-2-8 Bracket Gear, Gear Joint 2, 1 Removal
1) Remove the SCREW Π.
2) Remove the Bracket Gear ´.
3) Remove the Gear Joint 2 ˇ.
4) Remove the Gear Joint 1 ¨.
Assembly :
1) Be sure to align dot mark of Gear Joint 1
Πwith
dot mark of Gear Joint 2 ´ as shown Fig 4-17.
(Refer to Timing point1)
2) Confirm the Timing Point 2 of the Gear Joint 2 ´
and Slider Cam ˇ.
ΠSCREW
´ BRAKET GEAR
¨ GEAR JOINT 1
ˇ GEAR JOINT 2
Fig. 4-16 Bracket Gear, Gear Joint 1,2 Removal
ΠGEAR JOINT1
´ GEAR JOINT2
ˇ SLIDER CAM
TIMING POINT 1
TIMING POINT 2
Fig. 4-17 Gear Joint 1,2 Assembly
1-2-7 Motor Loading Ass’y Removal
1) Remove the screw Œ.
2) Remove the Motor Loading Ass’y ´.
´ MOTOR LOADING ASS`Y
ΠSCREW
Fig. 4-15 Motor Loading Ass’y Removal