RECORDING
Timer Program Recording
The programmable thiner allows you to record up to 6 different programs over one month
Preparation
• Select the wdeo channel (3 or 4; or video input mode on the TV
• Make sure that the clock is set correctly (page t61
• Store the channels on the VCR {pages t7 and 18)
c5_5_
Number
buttons
ENTER
PLAY
FF
STOP
REW
10
2,9
Example To record cable channel 25 in the SP tape speed from
9 20 p m until 10 00 p m on August 30 Today is August 25
][ Load a cassette with the safety tab attached
2 Press PROG to display the MENU screen
3 Select 'PROGRAM" using FFor
REFZ and press ENTER r
li CH _l,_ll___on OFF $PB
| -- -/ ........
$ I
O -- -/--
0 -- -/--
I -- -/--
EIIO
4 Move to the next using IF, and
select the channel number 25 by
pressing number buttons 2 and 5,
PLAY or STOP.
_ _L_J _
CH Om_ 0n 0FF SPD
12s -/ ........ stP
-- _1__
__ _/__
__ _/__
__ _/__
__ _/__
EnD
• Youcanmake Ll/L2'tForW-528/W-522only)or L' (ForW-422oniy)
appear on the channel nun_berposdlon by pressing I SELECTdepend_ng on
your connection {See pages t3)
To make corrections
Press REWto move back to the item, or FFto forward
(Continued)
26
To Next Page
Loading...
