Reference Information
2-8 Toshiba
23
PLAYBACK
1
On the SET UP screen, select
“COUNTER MEM.” using CURSOR
(
▲
) or (
▼
), and set to “ON” using
CURSOR ( ) or ( ).
2
Press PROG. twice to exit.
The memory-stop feature allows you to quickly return to a
counter reading of “0H00M00S” from any point on the tape.
Memory stop is automatically turned on whenever the time
counter with memory is displayed on the TV screen. This is
convenient when you want to watch a segment of the tape
repeatedly. You may also discover other useful application for
this feature.
Notes: If you are rewinding the tape and the VCR stops at
“0H00M00S M”, press REW again to continue
rewinding.
If you press the FF (fast-forward) button and the time
counter never reaches “0H00M00S M” between that
point and the end of the tape, the VCR will continue to
fastforward to the end of the tape.
Memory Stop Feature (Zero Return)
▼
▼
COUNTER
CURSOR
C.RESET
DISPLAY
ENTER
PROG
E
n
D : PROG
SET UP
PRESET
PROGRAM
TAPE LE
n
GTH
120 160 180
COU
n
TER MEM
on off
LA
n
GUAGE E
n
G FRA ESP
SAP SET
on off
22
PLAYBACK
Useful Functions in Tape Operation
These functions will help your playback.
Tape Remaining Time
To view the tape remaining time in the VCR display, select the
tape length beforehand.
1
Turn on the VCR and load a cassette.
2
Press PROG. to display the MENU screen.
3
Select “SET UP” using CURSOR ( ) or ( ), and press
ENTER.
4
Select the length of the tape, using
CURSOR ( ) or ( ).
T120: for a T-120 tape or shorter
T160: for a T-140 or T-160 tape
T180: for a T-180 tape
5
Press PROG. twice to exit.
6
Press COUNTER.
The remaining time (“RT - : - -”) appears in the VCR display.
Notes
• The displayed remaining time is an approximation.
• The remaining time is calculated according to the tape speed (SP or SLP)
and the cassette type.
Counter Function
You can view the clock, linear time counter or tape remaining
time in the VCR display or on the TV screen.
Each time you press COUNTER, the VCR display changes in
sequence as follows:
The indication above will also appear on the TV screen by pressing
DISPLAY. They are switchable with COUNTER.
To reset the linear time counter to “0:00:00”
The counter is automatically reset to “0:00:00” when a cassette is
ejected. If you want to reset at another point, such as the beginning of a
new recording, just press C. RESET.
Notes
• The linear time counter does not work on non-recorded portions on the tape.
• When the tape is ejected or the VCR is turned off, the display changes to
clock.
• If the tape rewinds back over “0:00:00”, “–” appears in the VCR display.
• The displayed time of the linear time counter is only an approximation.
→ Linear time counter → Tape remaining time (RT) → Clock
▼
▼
▼
▼
COUNTER
C.RESET
DISPLAY
ENTER
PROG
CURSOR
E
n
D : PROG
SET UP
PRESET
PROGRAM
TAPE LE
n
GTH
120 160 180
SAP SET
on off
COU
n
TER MEM
on off
LA
n
GUAGE E
n
G FRA ESP
To Next Page
Loading...
