Executing Sleep Mode
You can enter Sleep Mode in one of following ways:
In the Settings charm, tap Power, and then select Sleep.
Press the power button. Note that this feature must be enabled within
the Power Options.
When you turn the power back on, you can continue where you left off
when you shut down the tablet.
Sleep Mode limitations
Sleep Mode will not function under the following conditions:
Power is turned back on immediately after shutting down.
Memory circuits are exposed to static electricity or electrical noise.
Hibernation Mode
The Hibernation Mode feature saves the contents of memory to the internal
storage when the tablet is turned off so that, the next time it is turned on,
the previous state is restored. Note that the Hibernation Mode feature does
not save the status of any peripheral devices connected to the tablet.
Save your data. While entering Hibernation Mode, the tablet saves the
contents of memory to the internal storage. However, for safety sake,
it is best to save your data manually.
Data will be lost if you disconnect the AC adaptor before the save is
completed.
Automatic Hibernation Mode
The tablet can be configured to enter Hibernation Mode automatically when
battery power is exhausted to the point that tablet operation cannot be
continued. This can be specified in the Power Options. To define this
setting, do the following:
1. Tap Control Panel -> System and Security -> Power Options ->
Change when the computer sleeps -> Change advanced power
settings under Windows System in the Apps view.
2. Tap Low battery action or Critical battery action under Battery,
and then select Hibernate from the list with the condition of On
battery or Plugged in.
Benefits of Hibernation Mode
The Hibernation Mode feature provides the following benefits:
Saves data to the internal storage when the tablet automatically shuts
down because of a low battery condition.
You can return to your previous working environment immediately
when you turn on the tablet.
User's Manual
2-10
To Next Page
Loading...
