3. Press the memory media gently until it clicks into place.
Figure 4-10 Inserting memory media (TOSHIBA WT10PE-A)
Figure 4-11 Inserting memory media (TOSHIBA WT8PE-B)
1. Memory media slot 2. Memory media
Product appearance depends on the model you purchased.
Make sure that the memory media is oriented properly before you
insert it. If you insert the media in wrong direction, you might not be
able to remove it.
When inserting the memory media, do not touch the metal contacts.
You could expose the storage area to static electricity, which can
destroy data.
Do not turn off the tablet or switch to Sleep Mode or Hibernation Mode
while files are being copied. Failure to do so might cause data loss.
Removing memory media
The following instructions apply to all types of supported media devices. To
remove memory media, do the following:
1. Tap the Safely Remove Hardware and Eject Media icon on the
Windows Taskbar.
2. Tap memory media to eject.
3. Push the memory media until you hear a click to partially release it.
4. Grasp the media and pull it out of the slot.
If you remove the memory media or turn off the power while the tablet
is accessing the memory media, you might lose data or damage the
media.
Do not remove the memory media while the tablet is in Sleep or
Hibernation Mode. The tablet could become unstable or data in the
memory media could be lost.
User's Manual 4-15
To Next Page
Loading...
