Lock 100
Quick Start Guide v2.9
Copyright © Tosibox Oy, 2017
Matching the Lock with the Key
Deploying into Broadband Networks
1. Connect an Internet-connected ethernet cable to
the Lock’s WAN port.
2. Plug the devices into the Lock’s LAN ports (LAN
1-3 or connect wirelessly via WLAN). If the devices
have static IP addresses, please see Deploying the
Lock in the TOSIBOX
®
user manual.
1
2a
TOSIBOX
®
Lock
TOSIBOX
®
Key
AC Adapter
1. Connect the AC adapter to the Lock and wait for 2
minutes.
2. Insert the Key into the USB port of the Lock. When
the LED on the Key stops blinking, (after approx.
10 seconds) the matching is complete and you can
remove the Key from the USB port.
3. Go to if deploying into broadband networks
(ethernet) or if deploying into mobile
networks.
Internet /xDSL router
WAN
2a
2b
VPN tunnel
through Internet
PC
TOSIBOX
®
Mobile
Client
TOSIBOX
®
Key
W
A
N
L
A
N
Firewall
TOSIBOX
®
Lock
HMI
PLC
Camera
PC
To Next Page
Need help?
General
