38
Installation and Maintenance
Service Manual
are prepared completely.
2) Installation Site
● The selection of the installation place of the air conditioner unit
The installation must accord with the national and local safe criterion.
Since the quality of installation would affect the operation directly, user should contact
the seller and have the conditioner installed and tested by the professional install personnel
according to the install instruction instead of install by himself/herself.
● The selection of the installation place of the indoor unit
ƹ
Prevent direct sun burn.
ƹ
Make sure that the top steeve, ceiling, and the structure of the construction etc. is strong enough to
bear the weight of the unit.
ƹ
The drainage pipe is easy to drain.
ƹ
ƹ
The connecting pipe indoor and outdoor can by lead to outside conveniently.
ƹ
ƹ
The unit cannot be installed in the place where has the corrupt gas and serious dust, saline fog,
lampblack and huge humidity.
Note:
The air conditioner unit installed in the following place may have malfunction, if the malfunction cannot
prevent, please contact the Nominated Repair Center Of Gree Electric Appliances, Inc. Of Zhuhai.
a. The place with greasy all around.
b. The seashore place with salinity and alkali.
c. The place with vulcanized gas( such as vulcanized hot spring).
d. The place with high frequency equipment (such as wireless equipment, electric welding machine and
medical treatment equipment).
e. The place with special environment.
3) Caution for Installation
ƹ
Ensure the hanger is strong enough to withstand the weight of the unit.
ƹ
The drainage of the drain pipe is easy.
ƹ
No obstacle is in the inlet/outlet and the air circulation is in good condition.
ƹ
Ensure the installation space is left for the access to maintenance.
ƹ
or smog.
ƹ
It is the ceiling type unit (concealed in the ceiling).
ƹ
The power cords and connection lines of the indoor and outdoor units must be at least 1m away from
the TV set or radio to avoid the image interference and noise ( even if 1m is kept, the noise may be produced
due to the strong electric wave).
4) Installation Clearance Data
To Next Page
Loading...
Need help?
General