from an outlet. Keep cord away
from heat, oil, sharp edges or
moving parts. Replace damaged
cords
immediately.
Damaged
cords
increase the risk of electric shock.
e) When operating a power
tool outsides, use an
outdoor extension cord.
These cords are rated for
outdoor use and reduce the
risk of electric shock.
3) Personal Safty
a) Stay alert, watch what you
are doing and use common
sense when operating a
power tool. Do not use tool
while tired
or
under
in influence
d) Removing adjusting keys
or wrenches before turning
the tool “NO“. A wrench or a
key that is left attached to a
rotating part of the tool may
result in personal injury.
e) Do not overreach. Keep
proper footing and balance
at all times. Proper footing
and balance enables better
control of the tool in
unexpected situations.
f) Dress property. Do
not
wear loose clothing or
jewelry. Contain long hair.
Keep your hair, clothing,
and gloves away from
moving parts. Loose
chothes, jewelry, or long hair
of
drugs, alcohol,
or
medication.
can be caught in moving
A
moment
of
inattention
while
operating power tools
may
result
in
serious personal
injury.
b)
Use safety
equipment.Always
wear eye protection.
Dust mask,
non-skid safety shoes, hard
hat or hearing protection
must be used for appropriate
conditions.
c) Avoid accidental starting.
Be sure switch is “OFF”
before plugging in. Carring
tools with your finger on the
switch or plugging in tools
that have switch “ON“ invites
accidents.
parts. Keep handles dry,
clean and free from oil and
grease.
4) Tool Use and Care
a) Do not force tool. Use the
correct tool for your
application. The correct tool
will do the job better and
safer at the rate for which it is
designed.
b) Do not use tool if wtich
does not turn it “NO“ or
“OFF“. Any tool that cannot
be controlled with the switch
is dangerous and must be
repaired.
c) Disconnect the plug from
the power source before
To Next Page
Loading...