HUMIDITY
Press
HUMIDITY
40
Humidify
Setup
I
Current Room Humidity
Press the HUMIDITY button
again to return the display
to normal operation.
Page 5.3
Viewing the Indoor HumidityViewing the Indoor Humidity
0
To view the indoor humidity
reading, press the
HUMIDITY button
NOTE: Due to variations in environmental conditions, it is not always possible
to achieve the desired humidification or dehumidification setpoint.
TOTALINE
5
Requires the Humidity Module (optional accessory) to be
installed. To display the current humidity at the thermostat,
press the HUMIDITY button of the thermostat. The display will
then show the current indoor humidity along with the
humidification setpoint (Section 9).
Note: The humidity reading will not appear unless the Humidity
Module has been installed. If a sensor has not been installed
dashes will appear in place of the humidity reading.
To Next Page
Loading...
